What is the service temperature of EN 10149 S355MC hot rolled plates

The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as EN 10149 S355MC hot rolled plates, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.

Our steel pipes include four major types which are seamless pipe, ERW pipe, LSAW pipe, SSAW pipe, EN 10149 S355MC hot rolled plates. Seamless pipe supply scope is OD 10.3mm--965.2mm, wall thickness 1.0mm--60mm. The ERW pipes production range from OD 21.3mm--660mm, wall thickness 1.0mm--16mm. LSAW pipes can supply with OD 406mm--1524mm, wall thickness 6mm--50mm. SSAW pipes can produce maximum OD 3500mm, minimum OD 219.1mm, wall thickness 3.2--25.4mm.

S500MC hot-rolled high-strength steel chemical composition (melting analysis)%C: ≤0.12, Si: ≤0.50, Mn: ≤1.60, P: ≤0.25, S: ≤0.020, Ait: ≥0.015, Nb: ≤0.09, V: ≤0.20, Ti: ≤0.15Mechanical propertiesYield strength MPa: ≥500Tensile strength MPa: 550-700Elongation: ≥12

Contact Us

Get in Touch

Welcome to contact us through online consulting, emails and hotline if you are interested in our company or products. Our staff will reply you within 24 hours.